TrapIt

Vascular Intervention // Coronary
Trapping Balloon Catheter
 
TrapIt
 
 
 
 
Designed to trap the guide wire at low inflation pressure
 


Balloon designed to trap with high trapping friction
 
Highly compatible small shaft profile
 
Unique auto stop for positioning aid Designed to trap the guide wire at low inflation pressure
 
 
 
 
 
 

 

 

TrapIt

Trapping balloon catheter

Indicated to facilitate interventional device exchange while maintaining wire position in patients undergoing PCI procedures.*
 
 
Trapping at low inflation pressure
 
The TrapIt is a dedicated trapping balloon. It is indicated to securely trap a guide wire in the guiding catheter in order to exchange over-the-wire devices such as microcatheters. TrapIt does not require a guide wire to be advanced within the guide catheter. As an aid in positioning the balloon in a guide catheter a 90 or 100 cm tactile feedback stop is integrated in the shaft at the respective specific length for the used guide catheter.
 
 





Technical Data

Trapping balloon catheter
Nominal Pressure (NP) 8 atm
Rated Burst Pressure (RBP) 12 atm
Shaft diameter 2F
Balloon length 15 mm
Inflated balloon diameter 2,5 mm
Auto stop distance from tip 100 cm to 110 cm
Effective length 100 cm and 110 cm
Ordering Information Ordering number IMDS article number Guiding catheter compatibility (diameter) Guiding catheter compatibility (length)
   451667 TRP9015 6F, 7F, 8F 90 cm
    451668 TRP10015 6F, 7F, 8F 90 cm**, 100 cm
 

Version 3

 


Contact

contact
Country/Region

*Indication as per IFU
**For use with a 90 cm guiding catheter, the shaft of the 100 cm compatible TrapIt is provided with a depth marking to indicate that the distal tip
of the catheter is at the level of the distal tip of the guiding catheter.
 

TrapIt is a trademark of IMDS.
Distributed by BIOTRONIK in selected countries. 

Manufacturer:
IMDS Operations B.V.
Ceintuurbaan Noord 150
9301 NZ Roden,
The Netherlands
Tel +31 (0)50 8200230
info@imds.nl

Logo V2