Imagem
Pantera LEO Non-Compliant High Pressure Balloon
Imagem
Pantera LEO Non-Compliant High Pressure Balloon
Imagem
Pantera LEO Non-Compliant High Pressure Balloon
Imagem
Pantera LEO Non-Compliant High Pressure Balloon
Pantera LEO
NON-COMPLIANT HIGH PRESSURE BALLOON
Indicated for stent post- and pre-dilatation of resistant lesions. With its low compliance and reduced longitudinal balloon growth, Pantera LEO is tailored to stent post- and pre-dilatation of resistant lesions.
KEY FACTS
- Lowest compliance in class avoiding dog-boning effect
- Extra short balloon shoulders to minimize vessel trauma
- Patchwork coating for enhanced crossability
Product Details
Lowest Compliance in Class Avoiding Dog-boning Effect
The lowest compliance ensures controlled minimal growth1 up to RBP without any dog-boning effect.
Shortest Balloon Shoulders
The extra short balloon shoulders reduce longitudinal balloon growth, minimizing the potential for vessel trauma outside the treatment area.
Patchwork Coating for Enhanced Crossability
The tri-fold balloon is fully coated when folded and only partly coated when inflated. This patchwork coating enables enhanced crossability while minimizing slippage during dilatation.
Technical Data
| Proximal Shaft | |
|---|---|
| Design | Hypotube design |
| Diameter | 2.0 F |
| Shaft markers | 92 cm and 102 cm from tip |
| Coating | Hydrophobic |
| Distal Shaft | |
|---|---|
| Guiding catheter | 5F (min. I.D. 0.056") |
| Guide wire diameter | 0.014" |
| Lesion entry profile | 0.018" |
| Usable length | 145 cm |
| Distal shaft length | 34 cm |
| Balloon material | SCP (semi-crystalline polymer) |
| Balloon folding | 3-fold |
| Balloon markers | Platinum-iridium |
| Coating | Hydrophilic (end of balloon to GW exit port); hydrophobic (balloon and tip) |
| Diameter | 2.6F (ø 2.0 - 3.75 mm); 2.7F (ø 4.0 - 5.0 mm) |
Compliance Chart
| Balloon Diameter x Length (mm) | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal Pressure | atm2 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | |||||||
| (NP) | ø (mm) | 2.0 | 2.25 | 2.5 | 2.75 | 3.0 | 3.25 | 3.5 | 3.75 | 4.0 | 4.5 | 5.0 | |||||||
| Rated Burst Pressure | atm2 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 18 | 18 | |||||||
| (RBP) | ø (mm) | 2.05 | 2.32 | 2.57 | 2.83 | 3.09 | 3.35 | 3.61 | 3.89 | 4.12 | 4.56 | 5.07 | |||||||
Ordering Information
Contato
1 When compared to main competitors
2 1 atm = 1.013 bar